View 2013 HammerHead Brochure
Dux, Inflatable Manufacturer, and founder of the USA, inflatable Race Boats. Also called, Rubber Boats
What Makes Dux PD-400 (HammerHead) The Custom Inflatable Boat, of The Future and the #1 sold at Dux, Inflatable Boats? They are not your typical, Rubber Boats. Take a look.
Originally created for the A.P.B.A., Inflatable Race Boats, Superlite Tunnel Hull Racing circuit, this boat operates with extreme precision in turning & speed control, handling extreme water conditions to 12ft surf! Not to be attempted in your traditional, Rubber Boats.
The Dux HammerHead, Custom Inflatable Boat, Model PD-400, is a Catamaran designed, Custom Inflatable inflatable boat, with TRUE TUNNEL Inflatable boat, technology. Features include, more floor space, Maximum Stability, Un-Matched Speeds, and Extreme Rough water handling capabilities. With many KNOCK OFF'S now emerging, it further compliments the Excellence in Design to the Owner / Engineer, and the Employee's at Dux Inflatable Boats.
Re-designed as the first of many Dux model boats, in the early 1990's, The PD-400 remains the boat to beat. Currently still the 1-US and US-1, National Champion record setting boat, (set by Matt Merten and his crew in the early years of the New Millennium on Lake Alfred, In the State of Florida.)
The Performance Standards of all Dux, Inflatable Boats, were set by this unbelievable watercraft. Still built with the highest quality and True UV-A / B resistant materials, (Urethane Inflatable Boat Fabric), that carries a 10 year warranty. If you are in the market for a versatile watercraft, and are tired of the Jet Ski craze like many Dux HammrHead Owners, be sure to look closely at the Dux Model, PD-400 (Aka, HammerHead), before making your decision to purchase the outdated traditional, inflatable boats, of the past.
Dux is an innovator of superior quality in Design, water handling, smooth riding watercraft that is fit for most water conditions, with maximum safety.
The Dux PD-400 Aka HammerHead has an Inflatable Sponson (hi-jackers) attached on the bottom of each Sponson, for fast planing and low friction, to achieve rail like turning and unmatched Fuel Efficiency, Speed and Stability.
- Three piece composite flooring, ½ inch.
- Double sponson inflation design.
- Six air chambers in all.
- Aluminum transom with a lifetime warranty.
- Fiberglass wing.
- Length: 13'6"
- Beam: 7' 1"
- Tube Diameter: 21.70"
- EREZ 1055 32 OZ Air tight inflatable Boat fabric. Urethane
- Dry Weight: 235 lbs
- Max Persons: 6
- Max Capacity or Load: 1820
- Air Chambers: 6 plus wing
- Engine Shaft Length: 15" - 20" must specify!
- Max Hp: 70 Hp,, Max, Recommended 50 Hp
Plus shipping, Crating $89.00.
Call: Toll Free: (855) 389-2628
Direct: (616) 794-9588. Also contact us for Inflatable Boat Repair
Inflatable Productions is an OEM Honda and Evinrude Outboard Board Dealer.